Quick Curing Epoxy-Based Bond

Bond QUICK MENDER

KONISHI CO.,LTD.

Bond Quick Mender is a 2-component epoxy resin based quick curing bond/filler.
Advantage :
1. After mixing, Bond QUICK MENDER starts curing in 5 minutes and almost finishes curing in 15 minutes. It gets practical strength in 60 minutes.
2. Bond QUICK MENDER has high adhesiveness to a wide-range of hard material.
3. Since Bond QUICK MENDER is solvent free, its volume shrinkage after the curing is very little.
4. Bond Quick MENDER doesn't run down on the vertical wall. 5. Easy to use: just mix two components in equall amount.

Underwater Curable Epoxy Putty Bond

Bond E380

KONISHI CO.,LTD.

Bond E380 is a modified epoxy resin based putty bond to cure even on the wet surface or under water. Bond E380 is a good bond and sealing agent for the concrete structures which are built in the watery circumstances such as under the ground or by sea, river or canal.
Advantages :1. Applied not only on the wet surface but under water, Bond E380 keeps excellent adhesivity.
2. Bond E380 has good mechanical strength and chemical and water proof.
3. Its volume shrinkage after the curing is very little.
4. Since Bond E380 is in the form of putty, it is workable under water.

Tile Adhesive

SERABONE TAC

HANEDA CHEMICAL CO.,LTD.

SERABONE TAC is a polymer cement mortar tile adhesive. Ideal for adhering large exterior titles and stone material. By iron-plastering on the interior concrete mortar base or old tile surface to make the base, the large marble and granite tiles (300x300x12mm) and many other kind of tiles (including ceramic and porcelane) may be adhered. Tiles may be adhered over tiles.

Primer for Short Filler

BOND EPO

HANEDA CHEMICAL CO.,LTD.

BOND EPO is an epoxy polymer primer adhesive, used as a primer of Short Filler, an ideal primer when refitting a hard-to-adhere FRP or greasy surface.

Primer Sealer

HIPOLIC SEALER

HANEDA CHEMICAL CO.,LTD.

HIPOLIC SEALER is a water-based sealer ideal for prevention of lye and stain of interior and refitting base material, and surface strengthening.
Application for mortar, concrete, plywood, and gypsum board.